Graphics Board - HP EliteBook 8770w Maintenance And Service Manual

Graphics board

NOTE: The graphics board spare part kit includes replacement thermal material.
Description
AMD FirePro M5950 XT-GL 1GB GDDR5 (DP 1.2 and Eyefinity Plus support)
NVIDIA Quadro 5010M, N14E-Q5 4 GB dedicated GDDR5 video memory
NVIDIA Quadro 4000M, N14E-Q3 2 GB dedicated GDDR5 video memory
NVIDIA Quadro 3000M, N14E-Q1 2 GB dedicated GDDR5 video memory
Before removing the graphics board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the optical drive (see
bay hard drive on page
7. Remove the keyboard (see
8. Remove the top cover (see
9. Remove the fan/graphics board heat sink assembly (see
on page
Remove the graphics board:
1. Remove the 2 Phillips M2.5×3.0 screws (1) that secure the graphics board to the system board.
Battery on page
Optical drive on page
66).
Keyboard on page
Top cover on page
75).
51).
Service access cover on page
63) or upgrade bay hard drive (see
71).
83).
Fan/graphics board heat sink assembly
Component replacement procedures 115
Spare part number
689279-001
689282-001
689281-001
689280-001
52).
Upgrade