●
Primary memory modules (see
●
Expansion memory modules (see
●
Graphics board (see
●
Processor heat sink (see
●
Processor (see
Processor on page
●
Modem module (see
Remove the system board:
1.
Disconnect the power connector cable (1) from the system board.
2.
Disconnect the network cable (2) from the system board.
3.
Remove the 2 captive screws securing the fan (1).
Primary memory module on page
Expansion memory module on page
Graphics board on page
Processor heat sink on page
112)
Modem module on page
67)
115)
110)
97)
Component replacement procedures 105
69)