Display Panel - HP EliteBook 8770w Maintenance And Service Manual
Mobile workstation
Hide thumbs
Also See for EliteBook 8770w:
- Maintenance and service manual (136 pages) ,
- Getting started manual (72 pages) ,
- Quickspecs (41 pages)
Table of Contents
Advertisement
3.
Flex the inside edges of the top edge (3), the left and right sides (4), and the bottom edge (5) of
the display bezel until the bezel disengages from the display enclosure and then remove the
bezel (6).
Reverse this procedure to install the display bezel.
Display panel
Description
43.9 cm (17.3 in), HD+ AG LED WVA
43.9 cm (17.3 in), FHD AG WVA
Before removing the display panel, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the display assembly (see
5.
Remove the display bezel (see
Remove the display panel:
1.
Remove the 2 Torx screws on each hinge (1).
2.
Remove the two Phillips rawhead screws (2) on the upper left and right corners of the display
panel.
Display assembly on page
Display bezel on page
88).
78).
Component replacement procedures
Spare part number
691223-001
691224-001
79
Advertisement
Table of Contents
