Graphics Board - HP ZBook 15 G4 Maintenance And Service Manual

Graphics board

NOTE: The graphics board spare part kit includes replacement thermal material.
Description
NVIDIA Quadro M2200 graphics board
NVIDIA Quadro M1200 graphics board
NVIDIA Quadro M620 graphics board
AMD Radeon Pro WX 4150
Before removing the graphics board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery (see
6. Remove the heat sink (see
Remove the graphics board:
1. Remove the two Torx T8M3.0×5.5 screws (1) that secure the graphics board to the system board.
2. Lift the edge of graphics board upward until it sits at an angle (2), and then remove the board from the
socket (3).
Reverse this procedure to install the graphics board.
56 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 37).
Heat sink assembly on page
36).
52).
Spare part number
924955-001
924954-001
924953-001
924956-001