Discrete Graphics Board - HP ZBook 17 G3 Maintenance And Service Manual

4. Release the display cable (3) from the routing around the fan, and then remove the fan (4) from the
computer.
Reverse this procedure to install the fans.

Discrete graphics board

Description
NVIDIA Quadro M5000M: NVIDIA N16E-Q5 with 8 GB GDDR5 graphics subsystem memory
NVIDIA Quadro M4000M: NVIDIA N16E-Q3 with 4 GB GDDR5 graphics subsystem memory
NVIDIA Quadro M3000M: NVIDIA N16E-Q1 with 4 GB GDDR5 graphics subsystem memory
NVIDIA Quadro M2000M: NVIDIA N16P-Q3 with 4 GB GDDR5 graphics subsystem memory
NVIDIA Quadro M1000M: NVIDIA N16P-Q1 with 2 GB GDDR5 graphics subsystem memory
AMD FirePro W6150M Strato XT GL with 4 GB GDDR5 graphics subsystem memory
Before removing the discrete graphics board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service door (see
5. Disconnect the battery (see
6. Remove the GPU fan (see
Remove the discrete graphics board:
56 Chapter 6 Removal and replacement procedures for authorized service provider parts
Service door on page
Battery on page 34).
Fans on page 55).
33).
Spare part number
827228-001
827227-001
827226-001
850114-001
850113-001
850115-001