5.
Remove the service access cover (see
6.
Remove the optical drive (see
bay hard drive on page
NOTE:
The optical drive or hard drive carrier in the upgrade bay must be removed in order to
remove the keyboard.
Remove the keyboard:
1.
Position the computer with the front toward you.
2.
Loosen the three Phillips captive screws that secure the keyboard to the computer.
3.
Position the computer on its side with the display open at a 90 degree angle.
Service access cover on page
Optical drive on page
66).
52).
63) or upgrade bay hard drive (see
Component replacement procedures
Upgrade
73