Supermicro Supero 5015B-MR User Manual page 86

S S
UPER ERVER 5015B-MR User's Manual
Serial ATA
This setting allows the user to enable or disable the function of Serial ATA. The
options are Disabled and Enabled.
Native Mode Operation
Select Serial ATA to use the SATA mode, or select Auto to use the Native
Mode for ATA. The options are: Serial ATA and Auto.
Serial ATA (SATA) RAID Enable
Select Enable to enable Serial ATA RAID Functions. (For the Windows OS
environment, use the RAID driver if this feature is set to Enabled. When this
item is set to Enabled, the item: ICH RAID Code Base will be available for you
to select either Intel or Adaptec Host RAID fi rmware to be activated. If this item
is set to Disabled, the item-SATA AHCI Enable will be available.) The options
are Enabled and Disabled.
ICH RAID Code Base
Select Intel to enable the Intel SATA RAID fi rmware. Select Adaptec to use the
Adaptec HostRAID fi rmware. The options are Intel and Adaptec.
SATA AHCI
Select Enable to enable the function of Serial ATA Advanced Host Interface. (Take
caution when using this function. This feature is for advanced programmers only.
The Enhanced AHCI mode is available when the Windows XP-SP1 OS and the
IAA Driver is used.) The options are Enabled and Disabled.
SATA AHCI Legacy
Select Enable to use Legacy Mode for SATA Advanced Host Interfacing. When
this feature is set to Enabled, SATA Port 5 and SATA Port 6 are disabled. (Take
caution when using this function. This feature is for advanced programmers only.)
The options are Enabled and Disabled.
IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, SATA
Port 2, SATA Port 3
These settings allow the user to set the parameters of IDE Channel 0 Master/
Slave, IDE Channel 1 Master/Slave, SATA Port 2 and SATA Port3 connections.
Hit <Enter> to activate the following sub-menu screen for detailed options of
these items. Set the correct confi gurations accordingly. The items included in
the sub-menu are:
7-4