Supermicro Supero 5015B-MR User Manual page 57

7. With the CPU in the socket, in-
spect the four corners of the CPU
to make sure that it is properly
installed.
8. Use your thumb to gently push the
load lever down until it snaps into
the retention clasp.
9. If the CPU is properly installed
into the socket, the PnP cap will
be automatically released from the
load plate when the lever locks.
Remove the cap. Repeat steps to
install a second CPU if desired.
Warning: Keep the plastic PnP cap.
The serverboard must be shipped with
the PnP cap properly installed to protect
the CPU socket. Shipment without the
PnP cap properly installed will void the
warranty.
Chapter 5: Advanced Serverboard Setup
Gold dot
Socket key
CPU key
Notched corner
Load lever
CPU installed in socket
PnP cap released
from load plate
5-7
CPU pin 1