Supermicro Supero 5015B-MR User Manual page 66

S S
UPER ERVER 5015B-MR User's Manual
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. Attach an appropriate
cable from the chassis to inform you
of a chassis intrusion when the chas-
sis is opened
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL on the serverboard. See
the table on the right for pin defi ni-
tions. You must also have a LAN card
with a Wake-On-LAN connector and
cable to use this feature.
Wake-On-Ring
The Wake-On-Ring header is des-
ignated JWOR. This function allows
your computer to receive and be
"awakened" by an incoming call when
in the suspend state. See the table on
the right for pin defi nitions. You must
also have a WOR card and cable to
use this feature.
External Speaker/Internal Buzzer
On the JD1 header, pins 1-4 are for an
external speaker and pins 3-4 are for
the internal speaker. If you wish to use
an external speaker, connect it to pins
1-4 to. If you wish to use the onboard
speaker, you should close pins 3-4
with a jumper.
LAN1/2 (Ethernet Ports)
Two Ethernet ports (designated LAN1
and LAN2) are located beside the VGA
port on the I/O backplane. These ports
accept RJ45 type cables.
Chassis Intrusion
Pin Defi nitions (JL1)
Pin#
1
2
Pin#
1
2
3
Pin#
1
2
Speaker Connector
Pin Setting
Pins 3-4
Pins 1-4
5-16
Defi nition
Intrusion Input
Ground
Wake-On-LAN
Pin Defi nitions
(JWOL)
Defi nition
+5V Standby
Ground
Wake-up
Wake-On-Ring
Pin Defi nitions
(JWOR)
Defi nition
Ground (Black)
Wake-up
(JD1)
Defi nition
Internal Speaker
External Speaker