Grinder Safety Warnings - Chicago Electric 94071 Set Up And Operating Instructions Manual

9. The outlet must be properly installed
and grounded in accordance
with all codes and ordinances.
10. Do not use an adapter to connect
this tool to a different outlet.

Grinder Safety Warnings

For Your Own Safety Read Instruction
Manual Before Operating Grinder
1. Wear eye protection.
2. Use grinding wheel suitable
for speed of grinder.
3. Replace cracked wheel immediately.
4. Always use guards and eye shields.
5. Do not overtighten wheel nut.
6. Use only flanges furnished
with the grinder.
7. Adjust distance between wheel and
work rest to maintain 1/16 inch or
less separation as the diameter of
the wheel decreases with use.
8. Frequently clean grinding
dust from beneath grinder.
9. Wear a full face shield over ANSI-
approved safety goggles during use.
10. Do not grind with side of wheel
unless wheel is specifically
designed for that type of grinding.
11. DO NOT OPERATE WITH
ANY GUARD DISABLED,
DAMAGED, OR REMOVED.
12. The use of accessories or
attachments not recommended
by the manufacturer may result
in a risk of injury to persons.
SKU 94071 For technical questions, please call 1-800-444-3353
13. When servicing use only
identical replacement parts.
14. Only use safety equipment that has
been approved by an appropriate
standards agency. Unapproved
safety equipment may not provide
adequate protection. Eye protection
must be ANSI-approved and
breathing protection must be
NIOSH-approved for the specific
hazards in the work area.
15. Industrial applications must
follow OSHA guidelines.
16. Maintain labels and nameplates
on the tool. These carry important
safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
17. Avoid unintentional starting.
Prepare to begin work before
turning on the tool.
18. People with pacemakers should
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference
or pacemaker failure.
19. WARNING: Some dust created by
power sanding, sawing, grinding,
drilling, and other construction
activities, contains chemicals
known [to the State of California] to
cause cancer, birth defects or other
reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and
cement or other masonry products
• Arsenic and chromium from
chemically treated lumber
Your risk from these exposures
PAGE 6