Tool Set Up - Drill Master 69230 Owner's Manual

Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.

Tool Set Up

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool to its "OFF" position and unplug the tool from its
electrical outlet before assembling or making any adjustments to the tool.
TO PREVENT SERIOUS INJURY:
DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR REMOVED.
Moving guards must move freely and close instantly.
Installing the Blade
1. Remove the Table Leaf to access the Lower Blade Guard.
Empty any water in the tank.
2. Flip open the Upper Blade Guard. Unthread and remove the
Screw and Washer holding the Lower Blade Guard. Remove
the Lower Blade Guard.
Page 10 For technical questions, please call 1-800-444-3353.
Figure 5
Lower Blade
Guard
Figure 6
Item 69230