Drill Master 6" Cut-Off Saw Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Drill Master Manuals
  4. Saw
  5. Drill Master 6" Cut-Off Saw
  6. Owner's manual & safety instructions

Drill Master 6" Cut-Off Saw Owner's Manual & Safety Instructions

6" cut-off saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
visit our website at: http://www.harborfreight.com
email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
Save thiS manual.

Advertisement

Table of Contents
loading

Related Manuals for Drill Master Drill Master 6" Cut-Off Saw

Summary of Contents for Drill Master Drill Master 6" Cut-Off Saw

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing Save thiS manual.

  • Page 2: Important Safety Information

    table of Contents Safety ............2 Maintenance ..........10 Specifications ..........6 Parts List and Diagram ......14 Setup ............6 Warranty ............ 16 Operation ............ 7 WaRninG SYmBOlS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Extension Cord

    General tool Safety Warnings (cont.) 13. DON’T OVERREACH. Keep proper table a: ReCOmmenDeD minimum WiRe GauGe footing and balance at all times. FOR eXtenSiOn CORDS (120 vOlt) 14. MAINTAIN TOOLS WITH CARE. Keep tools sharp eXtenSiOn CORD nameplate and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

  • Page 4: Grounding Instructions

    Grounding instructions tO pRevent eleCtRiC ShOCk anD Death FROm inCORReCt GROunDinG WiRe COnneCtiOn ReaD anD FOllOW theSe inStRuCtiOnS: 110-120 v~ Grounded tools: tools with three prong plugs 1. In the event of a malfunction or breakdown, 6. Repair or replace damaged or worn cord immediately. grounding provides a path of least resistance for electric current to reduce the risk of electric shock.

  • Page 5: Vibration Safety

    If unreadable or missing, contact Your risk from these exposures varies, depending Harbor Freight Tools for a replacement. on how often you do this type of work. To reduce your exposure to these chemicals: work in a well 18.

  • Page 6: Specifications

    Specifications Electrical Rating 120V~ / 60Hz / 5.5A Motor No Load Speed 5000 RPM Max. Accessory Diameter 6" 3150240 Arbor Size 5/8" Setup - Before use: Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO pRevent SeRiOuS injuRY FROm aCCiDental OpeRatiOn: Release the trigger and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.

  • Page 7: Tool Set Up

    Operating instructions Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up tO pRevent SeRiOuS injuRY FROm aCCiDental OpeRatiOn: Release the pressure and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
  • Page 8 Angle Guide Bolt Clamp Knob Flip open Two Locations Quick Release Figure C The Clamp and Angle Guide are used together to hold the workpiece securely in place. The Angle Guide can be adjusted from 0 to 45° for straight or angled cuts. Adjust the Angle Guide first, then secure the workpiece in place with the Clamp.

  • Page 9: Work Piece And Work Area Set Up

    Work piece and Work area Set up 1. Designate a work area that is clean and well-lit. 2. Route the power cord along a safe route to reach The work area must not allow access by children the work area without creating a tripping hazard or or pets to prevent distraction and injury.

  • Page 10: Maintenance And Servicing

    maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO pRevent SeRiOuS injuRY FROm aCCiDental OpeRatiOn: Release the trigger and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. tO pRevent SeRiOuS injuRY FROm tOOl FailuRe: Do not use damaged equipment.

  • Page 11: Troubleshooting

    troubleshooting problem possible Causes likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.

  • Page 12: Please Read The Following Carefully

    pleaSe ReaD the FOllOWinG CaReFullY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 13 Record product’s Serial number here: note: if product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 69438 For technical questions, please call 1-800-444-3353.

  • Page 14: Parts List And Diagram

    parts list and Diagram parts list part Description part Description Knob 5X14 Hexagonal Screw Mechanical Spring Ф5 Spring Washer Moveable Guard Terminal Outer Flange Nut Inner Flange Spring Ф5x12 S/T Screw Support/Base Plate Ф5 Spring Washer Machine Foot Grinder Cover Gasket Output Shaft M4 Nut...

  • Page 15: Assembly Diagram

    assembly Diagram Item 69438 For technical questions, please call 1-800-444-3353. Page 15...
  • Page 16 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

69438

Table of Contents