Drill Master 67027 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Drill Master Manuals
  4. Saw
  5. 67027
  6. Set up and operating instructions manual
Drill Master 67027 Set Up And Operating Instructions Manual

Drill Master 67027 Set Up And Operating Instructions Manual

18v cordless reciprocating saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

reciprocating saw
set up and operating instructions
note: BatterY pacK (67029) sold separatelY
distributed exclusively by Harbor Freight tools
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVe tHis manual.
©
Copyright
2009 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
18V cordless
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
67027
®
.

Advertisement

Table of Contents
loading

Related Manuals for Drill Master 67027

Summary of Contents for Drill Master 67027

  • Page 1 18V cordless reciprocating saw 67027 set up and operating instructions note: BatterY pacK (67029) sold separatelY ® distributed exclusively by Harbor Freight tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read this material before using this product.

  • Page 2: Important Safety Information

    Water entering minor or moderate injury. SKU 67027 For technical questions, please call 1-800-444-3353. Page 2...
  • Page 3 SKU 67027 For technical questions, please call 1-800-444-3353. Page 3...

  • Page 4: Reciprocating Saw Safety Warnings

    If When using a handheld power tool, liquid contacts eyes, additionally maintain a firm grip on the tool with seek medical help. Liquid ejected both hands to resist starting torque. SKU 67027 For technical questions, please call 1-800-444-3353. Page 4...

  • Page 5: Vibration Safety

    • Do not use with Trigger locked on. reduce the risk of vibration-related • Properly maintain and inspect to injury: avoid electrical shock. Anyone using vibrating tools regu- larly or for an extended period should SKU 67027 For technical questions, please call 1-800-444-3353. Page 5...

  • Page 6: Extension Cords

    To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. saVe tHese instructions. extension cords note: Extension cords must not be used with this item’s charger. SKU 67027 For technical questions, please call 1-800-444-3353. Page 6...

  • Page 7: Specifications

    For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. SKU 67027 For technical questions, please call 1-800-444-3353. Page 7...

  • Page 8: General Operating Instructions

    Do not start the Saw if the Carefully pull on the Blade to make Saw Blade is in contact with anything sure it is locked in place. before operation. If necessary, lift To remove the blade: SKU 67027 For technical questions, please call 1-800-444-3353. Page 8...

  • Page 9: Plunge Cutting

    90° angle to the workpiece. Slowly start the cut. You may tip the Handle down for a slant cut. SKU 67027 For technical questions, please call 1-800-444-3353. Page 9...

  • Page 10: Maintenance And Servicing

    Wipe external surfaces of the tool with clean cloth. SKU 67027 For technical questions, please call 1-800-444-3353. Page 10...

  • Page 11: Troubleshooting

    Wear ANSI-approved safety goggles and NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. disconnect power supply before service. SKU 67027 For technical questions, please call 1-800-444-3353. Page 11...

  • Page 12: Parts List & Assembly Diagram

    Clamp Plate 1 Hexagonal Socket Screw Screw Dustproof Clamp Stator Dustproof Clamp Tapping Screw Quick Blade Clamp Rotor Retaining Ring Brush Holder Assembly Tapping Screw Retaining Ring Screw Gear Box SKU 67027 For technical questions, please call 1-800-444-3353. Page 12...

  • Page 13: Please Read The Following Carefully

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 67027 For technical questions, please call 1-800-444-3353. Page 13...

  • Page 14: Limited 90-Day Warranty

    This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 67027 For technical questions, please call 1-800-444-3353. Page 14...

Table of Contents