Controlling Audio; 3-Way Speaker System Setup - Kenwood DMX958XR Instruction Manual

Controlling Audio

You can adjust various settings such as audio
balance or subwoofer level.
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [Audio].
See the following section for each
setting.
• Set up Speaker / X'over (P.76)
• Controlling EQ / SW Level (P.78)
• Set Position / DTA (P.81)
• Controlling Fader / Balance (P.78)
• Set Volume Offset (P.79)
• Set Sound Effect (P.80)
• Use Audio Memory (P.82)

3-way speaker system setup

(DMX958XR / DMX908S)
Select the appropriate crossover network
mode for the speaker system used (2-way or
3-way speaker system).
# CAUTION
• Connecting 3-way speakers with the 2-way
mode selected can break the speakers.
1
Press the [HOME] button.
h HOME screen appears. h
2
Touch [
].
h Source selection screen appears.
h
3
Touch [STANDBY].
4
Press the button 1 followed by the
button 2 for 1 second at the same time.
1
h Speaker system select screen appears.
h
5
Select the crossover network mode.
h A confirmation screen appears.
h
Controlling Audio
2
75
English