Install the Firmware Upgrade
IF2 Network Reader User Manual
This section describes the different methods of how to install and run
the IF2 firmware upgrade.
Upgrade From the Web Browser Interface
You can use the web browser interface to upgrade the firmware on the
IF2.
To upgrade the IF2 using the web browser interface
1 From the menu, click Maintenance > Firmware. The Firmware
screen appears.
2 Click Browse to browse to the location of the upgrade file, and
then double-click the filename. The name of the file appears in the
Enter or select the name of the firmware upgrade file entry
field.
3 Click Upgrade IF2 RFID Fixed Reader. The upgrade process
begins and the firmware is transferred to the IF2.
During the upgrade, the web browser interface screen does not
auto-refresh. Click Refresh in the web browser to check the
progress of the upgrade. When the login screen appears, the
upgrade is complete and the IF2 has already rebooted.
Do not cycle power to the IF2 during the upgrade. If power is lost
during the upgrade, the IF2 may require factory repair.
Chapter 5 — Manage, Troubleshoot, and Upgrade the IF2
81