Table of Contents
Advertisement
Chapter 2 — Configure Network Settings
Access Services Descriptions
Service
Enable Web Server
Enable Bonjour
Service
Advertisement
Enable UPnP
Discovery
Set Up Logins
28
Description
Enables access to the IF2 via the web browser interface.
Select Enable Web Server (Insecure) to allow users to log in using either
a nonsecure (HTTP via port 80) or secure (HTTPS via port 443) web
interface.
Select Enable Web Server (Secure) to allow only the secure web interface
through port 443.
If both web server services are disabled, you need to restore the IF2 to the
factory defaults. For more information, see
Default Configuration" on page
Enables the IF2 to advertise services and be discovered by Bonjour zero-
configuration networking. Bonjour is enabled by default.
To prevent errors when using Bonjour, make sure the IF2 hostname does
not include spaces. To set the hostname, see
Network Settings" on page 25.
Enables the IF2 to be discovered by Universal Plug and Play protocols.
UPnP is enabled by default.
To ensure login security for configuring or maintaining the IF2, you
should use a password server or at least change the default user name
and password.
•
A password server is typically an embedded authentication server
(EAS) or other RADIUS server. To use a password server, you must
have a password server on the network that contains the user
name/password database. On the IF2, you need to enable RADIUS
for login authorization.
When you attempt to log in to the IF2, you must enter a user name
and password. This login is sent to the RADIUS server, which
compares the login to its list of authorized logins. If a match is
found, you can log in to the IF2 with read/write privileges.
For help, see the next section, "Configuring the IF2 to Use a
Password Server."
"Restore the IF2 to the
70.
"Configure Common
IF2 Network Reader User Manual
Advertisement
Table of Contents
