Intermec CK3 User Manual page 57

CK3 Mobile Computer User's Manual
Configuring 802.1x Security With Funk Security
1 Make sure the communications and radio parameters on your
CK3 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose Open and press Enter.
7 For Encryption, choose WEP and press Enter.
8 For Authentication, choose TTLS, PEAP, or TLS and press
Enter.
9 If you choose TTLS or PEAP:
a Tap User Name, enter your user name, and press Enter.
b Tap Password prompt, choose Enter password now, and
press Enter.
Note: You can use Password prompt to troubleshoot your
network connection.
c Tap User Password, enter your password, and press Enter.
d For Validate Server Certificate, choose Yes and press Enter.
If you choose TLS:
a Load a user and root certificate on your CK3. For help, see
"Loading a Certificate" on page
b For Validate Server Certificate, choose Yes and press Enter.
c Enter a User Name and Subject Name.
d (Optional) To increase your level of security, enter a Server 1
Common name and a Server 2 Common name.
10 Save your settings and exit Intermec Settings.
Chapter 2 — Connecting and Configuring the CK3
50.
45