Chapter 1 — Using the Computer
22
•
If you are scanning multiple bar codes in a small area, use one of
these parameters:
•
Aiming beam activation
•
Aim triggering mode
•
Center decoding
To enable these parameters, use Intermec Settings. For help, see
"Using Intermec Settings Directly on the CK3" on page
For help scanning using center-decoding, see the next procedure.
To scan a bar code using center-decoding
1 Press
to turn on the CK3.
2 Point the scanner window at the bar code label.
3 Press the Scan button or pull the trigger. The illumination beam
and the laser pointer appear.
4 Aim both the illumination beam and the laser pointer at the bar
code you want to scan.
Note: The center-decoding parameter only decodes a bar code if
the laser pointer is on the bar code and the illumination beam
covers the bar code.
CK3 Mobile Computer User's Manual
31.