Table 1.24 Task Management Functions - Fujitsu MAW3073 SERIES Specifications

Codes Description
00h Indicates no task management requests for the current task.
01h The task manager shall abort the task as defined in the ABORT TASK Message.
The task manager shall abort the task set as defined in the ABORT TASK SET
02h
message.
The task manager shall clear the task set as defined in the CLEAR TASK SET
04h
message.
The task manager shall perform a logical unit reset of the selected logical unit as
08h
defined in the LOGICAL UNIT RESET message.
The task manager shall perform a target reset as defined in the TARGET RESET
20h
message.
The task manager shall perform a clear ACA as defined in the CLEAR ACA
40h
message.
The task manager shall terminate the task with a GOOD status. The packetized
All other values
failure code shall be set to TASK MANAGEMENT FUNCTION NOT
reserves
SUPPORTED.
The ADDITIONAL CDB LENGTH field contains the length in 4-byte words of the
ADDITIONAL CDB field.
The write data (WRDATA) bit and read data (RDDATA) bit are not supported.
The CDB field contains the actual CDB to be interpreted by the addressed logical unit. The CDB
field and the task attribute field are not valid and is ignored if the TASK MANAGEMENT
FUNCTIONS field is not zero. Any bytes between the end of a 6 byte CDB, 10 byte CDB, or 12
byte CDB and the end of the CDB field shall be reserved.
The ADDITIONAL CDB field contains any CDB bytes beyond those contained within the
standard 16 byte CDB field.
The CDB field, ADDITIONAL CDB field, and TASK ATTRIBUTE field are not valid and are
ignored if the TASK MANAGEMENT FUNCTIONS field is not zero.
The contents of the CDB and ADDITIONAL CDB fields shall be as defined in the SCSI
command standards.
C141-C011
Table 1.24 TASK MANAGEMENT FUNCTIONS
1-115