Speaker Assembly - HP EliteBook 8760w Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the optical drive (see
bay hard drive on page
7. Remove the keyboard (see
8. Remove the top cover (see
9. Remove the Smart Card reader (see
10. Remove the Audio/USB 2.0 board (see
Remove the speaker assembly:
1. Remove the two Phillips M2.5x6.0 screws (1) that secure the speaker assembly to the base
enclosure.
2. Gently flex the band on the base enclosure (2) next to the speaker assembly.
98 Chapter 4 Removal and replacement procedures
Battery on page 45).
Service access cover on page
Optical drive on page
60).
Keyboard on page
Top cover on page
Smart Card reader on page
Audio/USB 2.0 board on page
58) or upgrade bay hard drive (see
65).
81).
51).
Spare part number
652540-001
46).
Upgrade
96).