Modem Module Cable - HP EliteBook 8760w Maintenance And Service Manual

Modem module cable

NOTE: The modem module cable is included in the Cable Kit, spare part number 652545-001.
Before removing the modem module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the optical drive (see
bay hard drive on page
7. Remove the keyboard (see
8. Remove the top cover (see
9. Remove the Smart Card reader (see
10. Remove the Audio/USB 2.0 board (see
11. Remove the modem module (see
Remove the modem module cable:
1. Position the computer right side-up with the front toward you.
2. Remove the modem cable (1) from the routing clips in the base enclosure.
3. Loosen the Torx M2.0x3.0 screw (2).
Battery on page 45).
Service access cover on page
Optical drive on page
60).
Keyboard on page
Top cover on page
Smart Card reader on page
Audio/USB 2.0 board on page
Modem module on page
58) or upgrade bay hard drive (see
65).
81).
51).
99).
Component replacement procedures 101
46).
Upgrade
96).