Audio/Usb 2.0 Board - HP EliteBook 8760w Maintenance And Service Manual

7. Remove the keyboard (see
8. Remove the top cover (see
Remove the fingerprint reader:
1. Position the top cover upside down with the front toward you.
2. Peel off the tape (1) that secures the fingerprint reader to the top cover.
3. Lift the fingerprint reader (2) from the top cover.
4. Slide the fingerprint reader cable (3) out from the clips in the top cover.
5. Remove the fingerprint reader (4).
Reverse this procedure to install the fingerprint reader.

Audio/USB 2.0 board

Description
Audio/USB 2.0 board
Before removing the Audio/USB 2.0 board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the optical drive (see
bay hard drive on page
96 Chapter 4 Removal and replacement procedures
Keyboard on page
Top cover on page
Battery on page 45),
Service access cover on page
Optical drive on page
60).
65).
81).
58) or upgrade bay hard drive (see
Spare part number
652517-001
46).
Upgrade