Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
2.5 HORSEPOWER
10" INDUSTRIAL
TILE/BRICK SAW
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Blade and stand sold separately.
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 69275
Advertisement
Table of Contents
Related Manuals for Chicago Electric 69275
Summary of Contents for Chicago Electric 69275
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Table of Contents Safety ............2 Maintenance ..........15 Specifications ..........8 Parts Lists and Diagram ......17 Setup ............9 Warranty ............ 20 Operation ........... 12 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: General Tool Safety Warnings
IMPORTANT SAFETY INFORMATION General Tool Safety Warnings Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 1. KEEP GUARDS IN PLACE and in working order. 11. - Page 4 Grounding Instructions TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION READ AND FOLLOW THESE INSTRUCTIONS: 110-120 V~ Grounded Tools: Tools with Three Prong Plugs 1. In the event of a malfunction or breakdown, 6. Repair or replace damaged or worn cord immediately. grounding provides a path of least resistance for electric current to reduce the risk of electric shock.
- Page 5 Tile Saw Safety Warnings For Your Own Safety Read Instruction Manual Before Operating Saw 1. Wear eye protection. f. Kickback – A sudden reaction to a pinched, bound, or misaligned blade, causing 2. Use saw-blade guard and spreader an uncontrolled workpiece to lift up and for every operation for which it can be out of the saw toward the operator.
- Page 6 Tile Saw Safety Warnings (cont.) POSITION OF TILE SAW EXTENSION CORDS Tile Saw 16. Use only extension cords that are intended for outdoor use. These extension cords are identified by a marking “Acceptable for use with outdoor tools; store indoors while not in use.” Use only extension cords having an electrical rating not Power Cord less than the rating of the product.
- Page 7 Tile Saw Safety Warnings (cont.) ADDITIONAL TILE SAW SAFETY WARNINGS 28. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in 19. DO NOT OPERATE WITH ANY GUARD DISABLED, close proximity to heart pacemaker could cause DAMAGED, OR REMOVED. Moving guards pacemaker interference or pacemaker failure.
-
Page 8: Safety
Vibration Safety This tool vibrates during use. Repeated or long-term 2. Do not smoke during use. Nicotine reduces exposure to vibration may cause temporary or permanent the blood supply to the hands and fingers, physical injury, particularly to the hands, arms and increasing the risk of vibration-related injury. -
Page 9: Setup
Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions Depth Depth Stop Lock Guard Lock Bevel Lock Depth Blade Lever... -
Page 10: Operation
ASSEMBLY TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch of the tool to its “OFF” position, remove the key, and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. - Page 11 Installing the Particle Tray Figure F: Particle Tray 1. Unlock the Table Lock Lever. Lift and turn the Toggle Table Stop so that its slot aligns with the Table. Table 2. Pull the Table to the front of the Water Tray Frame. 3.
- Page 12 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TOOL SET UP TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch of the tool to its “OFF” position, remove the key, and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
-
Page 13: Miter Adjustment
Miter Adjustment Note: The Miter Gauge can be used from either the left or the right side of the Blade. Miter Lock Miter Gauge Lever 1. Place the slot on the underside of the Miter Gauge on the Table Fence. Gauge 2. -
Page 14: General Operating Instructions
General Operating Instructions 1. Fill the Water Tray with clean water up to the Fill Rim (see Figure H on page 11) before every use. CAUTION: Water level must be kept above lip of pump basin at all times during operation. 2. -
Page 15: Maintenance
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch of the tool to its “OFF” position, remove the key, and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. -
Page 16: Troubleshooting
Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads. -
Page 17: Parts Lists And Diagram
Parts Lists and Diagram Main Parts List (parts 1-100) Part Description Size Part Description Size Cross Head Screw ST3.5×11 Brush Holder Press Plate Motor Housing Guard Knob Set Screw M5×8 Big Washer Hex Bolt M5×20 Right Guard Cover Rear Cover E-Clip Cross Head Screw ST4.2×9.5... -
Page 18: Stand Parts List
Main Parts List (continued, parts 101+) Part Description Size Part Description Size Bolt M6×20 Bearing 608-RS Angle Pointer Wheel A O Type Ring Ø6.7×1.8 Bearing Washer, A Depth Lock Pin Bolt Sleeve A Depth Lock Eccentric Screw Bolt M6×75 Working Table Front Limited Block Wheel, B Locknut... -
Page 19: Assembly Diagram
Assembly Diagram Item 69275 For technical questions, please call 1-800-444-3353. Page 19... -
Page 20: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 69275 and is the answer not in the manual?
Questions and answers
Where can I order parts
How to adjust belt tension
Need parts # 17 left guard cover, # 5 right guard cover, # 15 hose cover. How to purchase
The manual states that some parts are listed for illustration purposes only and may not be available individually as replacement parts. Additionally, all repairs and part replacements should be done by certified technicians. To check availability and purchase parts, contact the manufacturer or distributor directly.
This answer is automatically generated