Table of Contents
Advertisement
Speakers
Description
Speaker Kit (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure screws (see
5.
Remove the keyboard (see
6.
Remove the top cover (see
7.
Disconnect the battery cable (see
Remove the speakers:
1.
Turn the computer, with the front edge toward you.
2.
Release the speaker cables from the clips (1).
3.
Release the 2 Phillips PM 2.0×3.0 screws securing each speaker. (2)
4.
Remove the speakers and cables (3).
Reverse this procedure to install the speakers.
42
Chapter 4 Removal and replacement procedures
Base enclosure on page
Keyboard on page
26).
Top cover on page
28).
Battery on page
25).
32).
Spare part number
672353-001
Hide quick links:
Advertisement
Table of Contents
