Display Panel - HP Folio 13-2000 Maintenance And Service Manual

Display panel

Description
13.3-in, LED, BrightView SVA display panel
Before removing the display panel, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the base enclosure screws (see
5. Remove the keyboard (see
6. Remove the top cover (see
7. Disconnect the battery cable (see
Remove the display panel:
1. Turn the computer right-side up, with the front toward you.
2. Open the computer.
3. Disconnect the display panel cable from the system board (1).
4. Disconnect the USB/Audio board cable from the system board (2).
5. Disconnect the #1 and #2 WLAN antenna cables from the WLAN module (3).
NOTE:
WLAN antenna cable is connected to the WLAN module #2 terminal. For more information, see
WLAN module on page
34 Chapter 4 Removal and replacement procedures
Keyboard on page
Top cover on page
The #1 WLAN antenna cable is connected to the WLAN module #1 terminal. The #2
36,
Base enclosure on page
26).
28).
Battery on page 32).
Spare part number
672350-001
25).