12
Inside of cart, insert rear tabs (without holes) of tank heat shield into three slots between upper and lower back panels,
shown A. Attach front tabs of tank heat shield under front brace with three #8x3/8" self-tapping screws, shown B. Insert
left and right grease tray rails into slots beneath greas tray opening in rear upper panel. Attach rails to front brace with two
#8x3/8" self-tapping screws, shown C. Inside of cart, insert end of tank wire (without hole) into back of lower back panel.
Attach other end to bottom of front brace with a #8x3/8" self-tapping screw, shown D.
Some components not shown for
illustration purposes.
A
Insert
B
#8x3/8" tapping
Screw
#8x3/8"
self-tapping screw
end of tank wire
20
Tank heat shield
Left grease tray rail
#8x3/8" tapping
Screw
Insert
Front brace
C
Right grease tray rail
Grease tray opening
D
Tank wire