Char-Broil Performance T-47D Product Manual page 14

3
Place lower back panel between side panels at rear of bottom shelf. Make sure the slots noted in the view (A) below are
positioned as shown. Secure lower back panel to side panels using two 1/4-20x1/2" screws, 7mm lock washers, and 7mm
flat washers on each side.
4
This step requires two people
to lift and position grill head
onto cart.
Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging outside
the cart. Grill head must face open
side of cart.
14
7mm flat
7mm lock
washer
washer
A
Regulator hose
Lower back panel
1/4-20x1/2" screw
slots
Grill head