NOTE: DO NOT over tighten screws and washers that come into contact with porcelain coated surfaces. Over tightening
may cause the porcelain coating to crack and break, resulting in exposed metal that will be prone to rust.
7
Insert flange on right side shelf into side shelf brackets on side of firebox.
Attach right side shelf using three 1/4-20x3/4" screws, 7mm lock washers, 7mm flat washers and 1/4" nuts, shown A.
Attach rear of shelf using one 1/4-20x1½" screw, 7mm lock washer and 7mm flat washer in lower hole, shown B.
Attach front of shelf and fascia using one #8x3/8" self-tapping screw and large flat washer, shown C.
Attach front of shelf and fascia using one 1/4-20x3/4" screw, 7mm lock washer, 7mm flat washer and 1/4" nut, shown D/C.
Side shelf
Bracket
Fascia,
right side shelf
Main control
panel
16
1/4-20x1½"
7mm flat
screw
washer
7mm lock
washer
D
Back of main control panel
B
1/4"nut
1/4"nut
Igniter Switch
7mm lock
washer
1/4-20x3/4"
screw
A
1/4-20x3/4"
screw
7mm flat
washer
7mm lock
washer
C
screw
7mm flat washer