Protecting The Bd/Dvd; Checking The Remaining Recording Capacity - Hitachi DZ-BD10HA Instruction Manual

BD-RE RAM -RW (VR)

Protecting the BD/DVD

Although previously recorded movies
will not be erased by recording new
movies, a protect setting will ensure
against accidental erasure and
formatting. If the protect setting is
activated, however, you will not be
able to make new recordings until the
protect setting is canceled.
1
Insert a disc you want to protect
2
Press , then press MENU.
Select "Disc Setting"
Disc", then press the
3
confirmation button.
The confirmation screen appears.
Select "Yes", then press the
confirmation button.
4
• To cancel the protect setting,
repeat the same steps to select
"Unprotect Disc" in step 3.
Hint
To protect a card, lock its erasure
prevention switch (p.22).
72
HDD BD-RE
Checking the
Remaining Recording
Capacity
Insert the medium you want to
1
check (except for the HDD).
2
Press
Select "HDD Setting", "Disc
Setting", or "SD Card Setting"
"Capacity", then press the
3
confirmation button.
The information of the chosen
medium appears on the screen.
"Protect
After checking the information,
4
press
Hint
If you repeat recording/deleting
images on a card for a long time, you
may not be able to record scenes on it
due to data fragmentation. In this case,
dub or save your recordings on a disc
or on your computer first and format
the card.
BD-R RAM -RW (VR) -RW (VF) R
, then press MENU.
, or press C twice.
CARD