Hitachi DZ-BD10HA Instruction Manual page 102

When the camcorder is connected to a PC
Symptom
No medium icon The camcorder is not turned on. Check the power supply.
appears on the PC.
Turn the PC off and disconnect the USB cable. Then turn
the PC back on and reconnect the cable.
An error occurs Playing back High Definition (HD) movies requires high
while playing back data processing power. Quit other applications and play
movies recorded on back again.
the camcorder using
the PC.
The software does Turn the PC and camcorder off, and try again.
not run correctly on
the PC.
An error occurs The temperature of the camcorder is too high due to
during writing to a continuous operation.
disc. Disconnect the camcorder from the PC, remove the disc
from the camcorder, and then turn it off. After a few
moments, connect them again and write to a brand-new
disc.
Transfer of images Is the disc scratched or dirty?
stops. Clean the disc.
An error appears Make sure that your PC display adapter (video card)
when starting conforms to Direct X
ImageMixer 3
AVCHD Edition for
HITACHI.
The DISC EJECT While the camcorder is connected to the PC, use Explorer
switch does not work to right-click the camcorder drive icon and select "Eject".
when the camcorder
is connected to a PC.
When the time stamp The file system of this camcorder is operated on
of a file on a disc is Greenwich Mean Time (GMT), and time lag information
viewed on a PC, it is has not been set. The time stamp of files viewed on
different from the Explorer looks different from the actual recording time.
actual recording The actual recording time will appear for the date/time
time. indication on the playback screen.
It takes a long time If you are editing a video file whose contents are different
to save a video from those of the project settings, it may take some time,
edited. since the entire video file must be re-encoded. Reconfirm
the project settings.
Unable to import Before importing scenes from the disc, disconnect the
scenes from BD-R/ camcorder from the PC and finalize it. Once finalized,
DVD-RW/DVD-R. you cannot add a scene (except DVD-RW (VR mode)).
102
Cause and Correction
®
9.0c.
Reference
page
19
—
79
—
82
108
79
82
—
—
77