Adjusting The Camcorder's Output Settings According To Your Tv - Hitachi DZ-BD10HA Instruction Manual

Connecting the camcorder to your TV's component input
To
COMPONENT
terminal
Component cable (supplied)
* Do not connect anything to the camcorder's HDMI OUT terminal.
Connecting the camcorder to your TV or video
terminals
* Do not connect anything to the camcorder's HDMI OUT terminal and
COMPONENT output terminal.
Adjusting the camcorder's output settings
according to your TV
When connected to the component input
Select an appropriate option for "Component Output" in the camcorder menu,
according to the type of Component terminal on your TV set.
Turn on the camcorder, open the LCD monitor, and press MENU.
Select "Output Functions Setup" by pressing f/e, then press c.
Select "Component Output" by pressing f/e, then press c.
Select either "1080i" or "480i" by pressing f/e, then press the
confirmation button to confirm the setting.
Note
If you connect a standard (aspect ratio 4:3) TV which is not widescreen
television, the image appearing on the TV screen will be vertically distorted.
74
Not to be
connected.
yellow
To A/V OUT
terminal
A/V cable
(supplied)
To A/V OUT
terminal
A/V cable
(supplied)
Audio Input Component
Input
R L
red
green
red
blue
white
VIDEO
Audio
Input
Input
L
R
red white yellow