Remote Control - Hitachi DZ-BD10HA Instruction Manual

Remote control

REC
PHOTO
DIGITAL
MENU
ZOOM
SELECT
DELETE
DISC
NAVIGATION
Inserting the supplied lithium battery into the remote control
While inserting a thin tipped
instrument (paperclip, etc.) into
the hole marked PUSH, swing
the battery holder arm out.
Warning
BATTERY MAY EXPLODE IF NOT HANDLED PROPERLY. DO NOT
RECHARGE, DISASSEMBLE, OR DISPOSE OF IN FIRE.
Note
Replace the battery with a Hitachi Maxell, Sony, Panasonic, Sanyo, Toshiba CR2032,
or Duracell DL2032. Use of another battery may present a risk of fire or explosion.
Adjusting the hand strap
Fasten the hand strap according to the procedure in the diagram.
16
PHOTO button (p.29)
REC button (p.27, 28, 29)
DISPLAY
MENU button (p.20)
ZOOM
SELECT button (p.35)
d (reverse search) button (p.34, 38)
DELETE button (p.66)
DISC NAVIGATION button (p.34)
* Provides the same functionality with
DISPLAY button (p.31, 37)
ZOOM T button (p.44)
DIGITAL ZOOM button (p.44)
ZOOM W button (p.44)
f (reverse skip) button (p.34, 38)
c (forward search) button (p.34, 38)
Confirmation button (p.34, 38)
C (stop/cancel) button (p.41)
e (forward skip) button (p.34, 38)
Insert the lithium
battery with the
positive (+) terminal
facing down.
Battery holder
Slide the cover to
close it.
Release the Velcro strap.
Loosen strap and insert your
right hand from bottom.
Tighten the Velcro strap.
.