Loading Clock Battery; Clock Battery; Using The Infrared Remote Control - Hitachi Hi8 VM-H675LA Instruction Manual

Loading Clock Battory
The clock battery backs up any information set in the camcorder: it aliows the camcorder to retain the
date, time and any other settings when the power source is removed, it has a life span of about a year.
• Clock Battery
install the battery to prevent misplacing it
]_ Open the dock battery cover.
3 Close the cover.
WARNING: KEEP THE BATTERY AWAY
FROM CHILDREN AND PETS.
IF SWALLOWED
CONSULT A PHYSICIAN IMMEDIATELY
FOR EMERGENCY TREATMENT.
WARNING: BATTERY MAY EXPLODE IF
NOT HANDLED PROPERLY. DO NOT
RECHARGE, DISASSEMBLE OR DISPOSE
OF IN FIRE.
Note: Replace the battery with a Hitachi
Maxell Sony, Panasonic, Sanyo or Toshiba bat¬
tery, part no. CR2025 only, Use of another bat¬
tery could lead to risk of fire or explosion.
Note: Dispose of battery safely in accordance
with local laws. Do not dispose of in fire.
Note: Do not short circuit the battery.
Note: Do not hold the battery with the metallic
tweezers,
Note: Keep the battery in a dark, cool, dry
place.
Using the Infrared Remote Control
Installing the Remote Control Batteries
The remote control requires two 'AA" batteries.
^ Slide the cover in the direction of the arrow to
remove it, and then, insert the batteries. Be care¬
ful to install with correct polarity.
2 Re-attach the cover to the remote control.
Cautions on the batteries
9 Do not use the old and new batteries at the same
time.
* Do not mix batteries of different types.
* Do not short, take apart or dispose of batteries by
throwing them into a fire.
* When liquid leaks, wipe if off completely and then
insert new batteries.
VM-H675LA/VM-E575LA/ViVI~E573LA
E13