Assembly - Char-Broil Performance T-47D Product Manual

ASSEMBLY

Place bottom shelf upside down. Insert Caster Pin into the caster mounting plate to lock it in place, shown A. Spin
1
the caster clockwise into the threads on the bottom shelf until secure. Remove the Caster Pin and repeat for
remaining casters. Make sure the two locking casters are secured at the rear and the non-lock casters are
secured at the front. After all 4 casters are secured remove the Caster Pin and save for future maintenance.
Locking caster
Bottom shelf
2 Attach side panels to bottom shelf using three 1/4-20x1/2" screws per panel.
IMPORTANT: Panel with large hole must be on Right side of bottom shelf.
Left side panel
14
Non-lock caster
Rear
Magnet
A
Caster Pin
1/4-20x1/2" screw
Right side panel
(with large hole)