Resetting Menu Settings To Defaults (Reset); Turning Record Led On Or Off (Record Led); Changing Setting Of Demonstration - Hitachi DZ-HS500E Instruction Manual

RESETTING MENU SETTINGS TO DEFAULTS (RESET)

You can restore menu settings to defaults (initial settings at the factory (p. 154)). (Note, however, that
the date/time will not be reset.)
1
Choose "Reset" on the
"Initial Setup" menu
screen, and then press
the button.
The screen for verifying reset will appear.

TURNING RECORD LED ON OR OFF (RECORD LED)

You can switch off the recording indicator on the front of DVD video camera/recorder even during
recording.
Select "On" or "Off", and
then press the button.
On: The recording
indicator will light
red to show that the
DVD video camera/recorder is recording.
Off: The recording indicator will not light even
during recording.

CHANGING SETTING OF DEMONSTRATION

Choose the desired option
using the screen on the
right, and then press the
button.
Auto: To start demonstration if the DVD
video camera/recorder connected to
AC adapter/charger is inactive for
approx. 10 minutes or more after it is
turned on.
Off: To set demonstration to off.
Start: To start demonstration immediately.
38
2
I n i t i a l S e t u p
Be e p On
P o w e r S a v e Off
R e c o r d L E D
On
L a n g u a g e English
Demo Mode Auto
Re s e t
ENTER RETURN
Note
To cancel resetting midway, choose "NO" on the screen
for verification in step 2 or press the
Note
I n i t i a l S e t u p
• The Record LED setting will not appear in the on-
Be e p On On
O f f
P o w e r S a v e
R e c o r d L E D
L a n g u a g e
Demo Mode • The Record LED setting will be stored in memory
Re s e t
ENTER RETURN
• Specify "Record LED: Off" when recording a subject
• Even if "Record LED: Off" is specified, the recording
Note
I n i t i a l S e t u p
B e e p A u t o • If "Auto" is specified, the demonstration will not start if
Po w e r S a v e O f f
Re c o r d LED S t a r t
L a n g u a g e
Demo Mode
• Pressing the
R e s e t
ENTER RETURN
• If "Auto" is specified, the demonstration will not start
• The demonstration function will not work when the
• While the demonstration is being given, the recording
If you are sure that you
wish to reset, use the
button to choose
"YES", and then press
the button.
The setting items have now been reset to
defaults.
:
:
screen information display.
even when the DVD video camera/recorder is turned
off.
behind a glass or water tank that reflects light: The
reflected light of the recording indicator will not be
recorded.
indicator will light while the self-timer is counting
down.
:
a battery is connected.
(STOP/EXIT) or DISC NAVIGATION
button will exit demonstration.
when the power switch on this DVD video camera/
recorder is set to "DVD" and a DVD is loaded, or when
the power switch is set to "SD" and a card is loaded.
DVD video camera/recorder is connected to PC.
indicator will blink.
Re s e t
Re s e t ?
YES NO
ENTER
button.