Initial Settings; Switching Operating Sound On Or Off (Beep); Turning Dvd Video Camera/Recorder Off Automatically (Power Save) - Hitachi DZ-MV580E (SW) Instruction Manual

Initial Settings

SWITCHING OPERATING SOUND ON OR OFF (BEEP)

Setting
On
Off
1
Press the MENU button,
choose "Beep" on the
"Initial Setup" menu
screen, and then press
the A button.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
Setting
On
Off
1
Press the MENU button,
choose "Power Save" on
the "Initial Setup" menu
screen, and then press
the A button.
2
Select "On" or "Off",
and then press the A button.
3
Press the MENU button to end the setting.
Beep is heard when the power switch is changed over, the REC button is pressed,
etc.
No beep is heard.
I n i t i a l S e t u p
Be e p On
P o w e r S a v e Of f
R e c o r d LED
L a n g u a g e
Demo Mode
Reset
ENTER RETURN RAM
To engage power save. If the DVD video camera/recorder is left in the recording
pause status without being operated for 5 minutes, it will automatically turn off to
prevent the battery from discharging needlessly.
To cancel power save
I n i t i a l S e t u p
Be e p
P o w e r S a v e On
R e c o r d LED Of f
L a n g u a g e
Demo Mode
Reset
ENTER RETURN RAM
Content
2
Select "On" or "Off", and then press the A
button.
3
Press the MENU button to end the setting.
:
Note
The "Beep" setting will be stored in memory even when the
DVD video camera/recorder is turned off.
Content
:
Note
•
To turn the DVD video camera/recorder on again from
automatic off activated by the power save function, set
the power switch to "POWER OFF", and then set it to "
N
VIDEO", " PHOTO" or "
•
The Power Save setting will not appear in the on-screen
information display.
•
The Power Save setting will be stored in memory even
when the DVD video camera/recorder is turned off.
123
O
P
PHOTO"
105