Status Led (Ls-Wvl, Ls-Wxl) - Buffalo LinkStation User Manual

Appendix

Status LED (LS-WVL, LS-WXL)

There are 5 LEDs on the LinkStation: "Power", "Function", "Info/Error", "Link/Act", and "AC adaptor".
Power LED
Status
Solid Blue
Blinking Blue
LED is off
Function LED
Status
Solid Blue
Blinking Blue
LinkStation User Manual
Power LED
Function LED
Link/Act LED
Info/Error LED
AC adaptor LED
Descriptions
The LinkStation is powered on.
The LinkStation is starting up or shutting down.
The LinkStation is off.
Descriptions
DirectCopy is ready (lights for 1 minute).
USB device is dismounted (lights for 5 seconds).
Initialization is in progress.
DirectCopy is in use.
Note:
The function LED (blue) and the info/error LED (orange) blink together if an error
occurs during DirectCopy. Please do the following if this happens:.
1. Shut down the LinkStation .
2. Detach the USB device from the LinkStation.
3. Reattach the USB device to the LinkStation.
4. Power on the LinkStation.
162