Buffalo LinkStation User Manual page 142

Chapter 4 Web Admin interface
Name
Backup
Backup
Jobs
Setup
Click
Backup
[Create
Operation
New Job]
Mode
to display
this
option
in the
[Backup ]
screen.
LinkStation User Manual
Descriptions
The following table shows behavior during each operation mode. Behaviors will
vary if [Create Target Folder for Backup] is selected or not in Backup Option.
Note: This example uses "/target" as the backup target.
If data is backed up to the USB hard drive, the "target" below, will be displayed as
"usbdisk*". and * will be 1 - 2 (number).
If data is backed up to the LinkStation, the "target" below, the shared folder name
of the backup source will be displayed.
The Backup Log File is displayed under the following names in Backup Sources.
backuplog (backup task number)_(backup starting time).txt
Example: If the date the backup is started on March 27, 2004, 19:55, "
backuplog1_200403271955.txt" is created.
Normal
(Copy all files without overwriting previously backed up data every time)
Target Folder for
Backup
Create (Forced)
Overwrite Backup (Append Backup)
(Only copy and overwrite the files with changes based on the file size and time
stamp*2)
Target Folder for
Backup
Create
Do not create
*1 The format of the folder is yyyymmddhhmm by using the backup starting
time.
For example, if the starting time is March 27, 2004, 19:55, the folder name
is displayed as "200403271955".
*2 [Time Stamp] here is not the time information that can be verified Win-
dows Macintosh, but the time information managed by LinkStation.
*3 If there is the difference in the shared folders that is above the backup
folder, files will not be deleted.
Backup Sources Backup Targets / Result
/share /target/(Date)*1/share
/share/folder /target/(Date)*1/folder
Backup Sources Backup Targets / Result
/share /target/_backups/share
/share/folder /target/_backups/share/folder
/share /target
/share/folder /target/folder
Re-
marks
Re-
marks
141