Buffalo LinkStation User Manual page 127

Chapter 4 Web Admin interface
Name
Workgroup/Domain
Click [Modify Settings]
to change settings.
LinkStation User Manual
Authentication Select the method to join the network ([Workgroup], [NT
Method Domain], or [Active Directory]). [Workgroup] is the default.
Networking knowledge is required to configure other methods.
Consult your network administrator for details.
Workgroup Name Enter the [Workgroup Name] to have the LinkStation join a
Microsoft network group.
Workgroup names may contain up to 23 bytes(UTF-8).
Alphanumeric characters, multi-byte characters, hyphens,
underscores, and periods may be used.
Do not use a symbol as the first character of the workgroup
name.
WINS Server IP Enter the IP address of a WINS Server to use WINS Server.
Address
NT Domain Name Enter [NT Domain Name] to use [NT Domain] as the method to
join the network.
* You can enter up to 23 bytes(UTF-8).
* Alphanumeric characters, multi-byte characters, -(hyphen), _
(underscore), and .(dot) may be used.
* Do not use a symbol as the first character.
NT Domain Enter [NT Domain Controller Name] to use [NT Domain] as a
Controller Name method to join the network. Register the computer account
which has the same name as the LinkStation to the Domain
Controller.
* You can enter up to 63 bytes(UTF-8). Do not use multi-byte
characters.
* Alphanumeric characters, -(hyphen), and _(underscore) may
be used.
* Do not use a symbol as the first character.
Active Directory Enter [Active Directory Domain Name (NetBIOS Name)] to use
Domain Name [Active Directory] as a method to join the network.
(NetBIOS Name) * You can enter up to 23 bytes(UTF-8).
* Alphanumeric characters, multi-byte characters, -(hyphen), _
(underscore), and .(dot) may be used.
* Do not use a symbol as the first character.
Descriptions
126