Buffalo LinkStation User Manual page 43

Using your LinkStation
To access to the LinkStation with an FTP client
Configure your FTP client software with the following settings:
• Host Name
• Username
• Password
• Port
Example ftp://192.168.11.150/
• You cannot write by FTP if the shared folder is set to read-only on the LinkStation.
• Access restrictions are applied based on the settings in the LinkStation. The restrictions
are not displayed for users without permissions for the share.
• To access your FTP share from outside of your network, you may need to configure your
router and firewall. Consult your router documentation for more information.
• Shared folders appear as follows when connected by FTP:
- disk1 share
- usbdisk1
- info
• The internal hard drive of the LinkStation is displayed as disk1, and a USB hard drive
(optional) will be displayed as usbdisk1.
• "usbdisk1" is not displayed when the USB hard drive is not connected, or if access is
restricted.
LinkStation User Manual
IP address of the LinkStation.
Username registered on the LinkStation
Password registered to the LinkStation
21
42