Direct Copy - Buffalo LinkStation User Manual

Using your LinkStation

Direct Copy

DirectCopy automatically copies movie, music, and images directly to the LinkStation from a USB
device.
You can connect many types of USB devices to the LinkStation, including USB hard drives, USB flash
drives, single-card card readers, digital cameras, and USB printers. USB hubs, mice, keyboards, and
card readers that support 2 or more cards are not supported.
1
Connect to a USB device (USB flash/digital camera/hard disk/card reader) to the LinkStation.
USB
Connector
Power LED
2
While the function button is blue, press it to automatically copy data from the USB device to
a shared folder on the LinkStation. The function button will flash blue during the copy. Push
the function button again to abort the copy.
LinkStation User Manual
After the USB device is recognized, the function button is lit in
blue for 60 seconds. After the function button is lit in blue, you
can access the USB device.
If an unsupported USB memory device is connected to the
LinkStation, then the function button will not light up in blue,
and the device will not be mounted.
Function
Button
44