c.
To change a field, click the appropriate radio button, enter a valid value or
choose from a listbox. Table 15 indicates where to find more information.
Table 15: Reference to Connection Method Rules and Values
For this method
Serial port redirection
Telnet server
Raw TCP server
Raw TCP client
Modem emulation
Configuration utility
d.
If you changed any values, click the Apply button. You will be prompted to
confirm. When confirmed, the EEPROM configuration is updated immedi-
ately. The change will take effect during the next connection to that port.
4.6 Displaying Hardware Information
The Hardware Information display includes the following items:
•
Model number
•
Hardware revision number
•
Number of serial ports
•
EEPROM revision number
•
Amount of SDRAM in megabytes
•
Amount of FLASH memory in megabytes
•
Amount of EEPROM configuration memory in kilobytes
•
Hub MAC address
•
Hub serial number
This information cannot be modified.
To display hardware information:
Select Hardware Information from the Main Menu.
4.7 Displaying or Updating FLASH Memory
The Flash Update display includes information about the current images loaded in
FLASH memory. You may update the embedded application image or bootstrap
image in FLASH memory. Before updating a FLASH image, you must configure a
TFTP server on the target server system and install the new FLASH image in the
appropriate location, which is usually relative to the TFTP root directory.
Equinox ESP-2 MI Serial Hub Installation and User Guide
See this table for descriptions, rules and values
Table 6 on page 11
Table 7 on page 11
Table 8 on page 12
Table 9 on page 13
Table 10 on page 15
Table 13 on page 20
25