Section 1 - Hardware - Equinox Systems SuperSerial Product Installation Manual

Section 1 - Hardware

The Equinox SuperSerial Technology (SST) Ethernet Serial Provider
(ESP) can be installed in a local or remote LAN to provide access for
widely distributed serial devices. The ESP is supported under Windows
2000, Windows NT 4.0, Windows NT 3.51, OpenServer 5.0.5a or higher,
UnixWare 7.0.1a or higher, Linux and AIX 4.3 and 5.1.
The ESP can be managed using EquiView Plus, the Equinox premier serial
port management software, running on any Microsoft Windows host, or
espdiag and espcfg for OpenServer, UnixWare, Linux or AIX.
The ESP kit contains the items listed in Table 1.
Part No. Description
990380 8-port ESP Unit
or
990381 16-port ESP Unit
590272 Installation Guide (this document)
750121 Loopback Connector
650185 Equinox SuperSerial Software CD
770379 Two Wall-mount Brackets
Special-order accessories for the ESP are available, as listed in Table 2.
Part No. Description
Modular Adaptors
210090 RJ-45 to DB-25 DTE Male Adaptor
210091 RJ-45 to DB-25 DTE Female Adaptor
210092 RJ-45 to DB-25 DCE Male Adaptor
210093 RJ-45 to DB-25 DCE Female Adaptor
210094 RJ-45 to DB-9 Male Adaptor
210095 RJ-45 to DB-9 Female Adaptor
Modular Cables
690026 10-foot 8-wire Reversing Modular Cable
690227 25-foot 8-wire Reversing Modular Cable
690228 75-foot 8-wire Reversing Modular Cable
Rack Mount Shelf
790180 Rack Mount Shelf
Wiring Starter Kit
750122 Wiring Starter Kit includes six adaptors (210090, 210091,
210092, 210093, 210094 and 210095) and a 10-foot 8-wire
modular cable (690226)
2
Equinox ESP 10/100 Serial Hub Product Installation Guide
Table 1. ESP Kit Contents
Table 2. Special-Order Accessories