Declaration Of Conformity - Equinox Systems ESP-2 MI Installation And User Manual

Declaration of Conformity

Manufacturer's Name:
Manufacturer's Address:
declares, that the products
Product Name:
Model Name:
Product Options:
Year of Manufacture:
conform to the following Product Specification:
Supplementary Information:
The products herewith comply with the requirements of the Low Voltage Directive, 73/23/EEC
and the EMC Directive 89/336/EEC, including amendments by the CE-marking
Directive 93/68/EEC.
To maintain EN 55024 Product Family Immunity compliance, it is recommended that quality
Unshielded Twisted Pair (UTP) or Shielded Twisted Pair (STP) cabling be used, such as that
recognized by the ANSI/TIA/EIA-568-A Standard for the serial port media.
Federal Communication Commission (FCC) Statement
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in the residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Canada
This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Equinox ESP-2 MI Serial Hub Installation and User Guide
Equinox Systems
an Avocent Company
One Equinox Way
Sunrise, Florida 33351-6709 USA
Ethernet Serial Provider
ESP-2 MI
All
2004-
Safety: EN 60950
UL 60950 3rd Ed., CAN/CSA C22.2 No. 60950-00
EMC: EN 55022: 1998 Class A
EN 610003-3
EN 55024L 1998
FCC Part 15 Class A
45