Table of Contents
Advertisement
Table 21 indicates where to find more information.
Table 21: Reference to Connection Method Rules and Values
For this method
Serial port redirection
Telnet server
Raw TCP server
Raw TCP client
Modem emulation
Configuration utility
b.
When the port connection method menus are completed, you are prompted
to confirm any changes. If you confirm, the EEPROM configuration is
updated immediately, but the changes will not take effect until the next
connection to that serial port.
5.6 Displaying Hardware Information
The Hardware Information display includes the following items:
•
Model number
•
Hardware revision number
•
Number of serial ports
•
EEPROM revision number
•
Amount of SDRAM in megabytes
•
Amount of FLASH memory in megabytes
•
Amount of EEPROM configuration memory in kilobytes
•
Hub MAC address
•
Hub serial number
This information cannot be modified.
To display hardware information:
1.
From the Top Menu, enter
2.
From the Server Configuration menu, enter
5.7 Displaying or Updating FLASH Memory
The Flash Update display includes information about the current images loaded in
FLASH memory. You may update the embedded application image or bootstrap
image in FLASH memory. Before updating a FLASH image, you must configure a
TFTP server on the target server system and install the new FLASH image in the
appropriate location, which is usually relative to the tftp root directory.
36
See this table for descriptions, rules and values
Table 6 on page 11
Table 7 on page 11
Table 8 on page 12
Table 9 on page 13
Table 10 on page 15
Table 13 on page 20
to select Server Configuration.
0
5
Equinox ESP-2 MI Serial Hub Installation and User Guide
to select Hardware Information.
Hide quick links:
Advertisement
Table of Contents
