Table of Contents
Advertisement
Table 16: Configurable Features (Continued)
Feature
Allow web
based interface
Allow Telnet to
configuration utility
When the ESP-2 serial hub is reinitialized, all configurable features are restored to
their default settings.
To view or change configurable features:
1.
From the Main Menu, select Configurable Features.
2.
Click the Enabled or Disabled radio button next to the feature to be changed.
3.
If you changed any setting, click the Apply button. The EEPROM configuration
is updated immediately, but the change will not take effect until the next reboot.
To reboot, click the Reboot button.
4.9 Downloading a Configuration File
To ease the task of configuration, the ESP-2 hub supports file-based configuration.
The Configuration Download operation initiates the loading of a configuration file
from a TFTP server. The commands in the file are processed and the configuration is
then updated. See Configuration Files on page 40 for more information.
To download and process a configuration file:
1.
From the Main Menu, select Configuration File Download.
2.
Enter the TFTP server IP address and the pathname of the configuration file.
The outcome of the configuration update will be displayed. If an error occurred with
the TFTP address or file pathname, the message will indicate a time-out condition. If
an error was encountered in the configuration file, the display includes the command
line number and the erroneous entry.
The Status from last operation field indicates the result of the previous unattended
configuration operation. If that operation was successful, this field will be empty; if
an error occurred, a message will be displayed.
The EEPROM configuration is updated immediately, but some changes may not take
effect until the next reboot. You are notified if this applies. To reboot immediately,
click the Reboot button.
4.10 Displaying General Statistics
The General Statistics display includes the items described in Table 17. All values are
cumulative since the ESP-2 serial hub was last reset.
Equinox ESP-2 MI Serial Hub Installation and User Guide
Description
When enabled, the web interface may be used. When disabled, that
interface is not available. The default value is enabled.
When enabled, the configuration utility may be accessed with Telnet.
When disabled, the configuration utility is not accessible with Telnet. The
default value is enabled.
27
Hide quick links:
Advertisement
Table of Contents
