Dvmrp Interface Configuration - D-Link DES-3326S User Manual

<125>
Max Response
Time <10>
Robustness
Variable <2>

DVMRP Interface Configuration

To configure DVMRP for an IP interface, Click the DVMRP
Interface Configurations link from the
Routing Protocols folder:
Figure 6-48. DVMRP Interface Configuration
242
DES-3326S Layer 3 Fast Ethernet Switch User's Guide
125 seconds.
length of time between sending IGMP
queries.
Sets the maximum amount of time
allowed before sending an IGMP
response report. A value between 1
and 25 seconds can be entered, with
a default of 10 seconds.
A tuning variable
subnetworks that are expected to
lose a large number of packets. A
value between 2 and 255 can be
entered, with larger values being
specified for subnetworks that are
expected to lose larger numbers of
packets.
This specifies
to allow
IP Multicast
Web-Based Switch Management
the
for