Feed Mechanism - Brother Z-8550A Service Manual

7-2. Feed mechanism

0118B
0119B
Tighten after adjusting the feed dog.
Refer to "9-7. Feed dog forward/back and
sideways position".
Push all the way to the left until it
touches, then tighten the set screw.
Z-8550A, 8560A
7. ASSEMBLY
1. Feed lifting link
2. Feed bar set
3. Feed rocker shaft
(Insert from the left all the way to
the right.)
(1) Spacer
(2) Bush L
(3) Feed rocker shaft
(4) Retaining ring
4. Set screw collar
5. Set screws [2 pcs]
6. Screws [2 pcs]
(Temporarily tighten)
(5) Bush M
(6) Feed bar set
(7) Feed rocker shaft
(8) Feed rocker arm
0120B
56