Updating The Control Program Version; Control Program Version Updating Procedure - Brother Z-8550A Service Manual

4. USING CF CARDS

4-8. Updating the control program version

4-8-1. Control program version updating procedure

1
Carry out steps 1 to 3 in "4-3. Preparation for reading/writing data".
2
Select [r 7] in CF data read/write mode.
3
4
NOTE:
* Version updating takes a maximum of 60 seconds. (The time taken will vary depending on the manufacturer and
storage capacity of the CF card being used.)
* Never remove the CF card or turn off the power switch while reading of the CF card is in progress.
* If the filename and folder name for the control program are incorrect, error [Err 421] will be displayed.
5
Set the power switch (1) to OFF and remove the CF card.
29
Version number for control program saved on CF card
Version updating in progress
Z-8550A, 8560A
Complete when [End] is displayed
0197B
0206B
0207B
0208B
0196B