Parent Control - Strong SRT 5425 User Manual

Note that some of these settings are restricted by the type of connection you have made
between the
• If you have connected the
output setting must be set to AC3.
4. Select an option you want to change. If necessary, press
5. With the option you want to change highlighted, press
values (shown in the panel at the right of the screen). Stop when the value you want is
displayed.
6. If there is another option you want to change, repeat this procedure from step 4.
7. When you have finished, press EXIT to save and return previous menu.

Parent control

The is shipped with a default personal identification number (PIN). The default PIN is
000000. The PIN is required if you have enabled the parental lock To change the PIN:
1. Press MENU on the remote control. The Main Menu appears.
2. If User Settings is not highlighted in the main menu, press
User Settings menu appears.
3. If Parent Control is not highlighted, press
The Parent Control menu appears.
and your TV. For example:
to a Dolby Digital decoder amplifier, the S/PDIF
or
29
or until the option is highlighted.
or to step through the allowable
or until it is and then press OK. The
until it is and then press OK & Input Password.